.The front disc brake pads are at 3mm will need to replace the front brake pads and rotors. the rear disc brake pads are at 3-4 mm pad material remaining. Will need to replace the rear brake pads and rotors also
Replace rear brake pads and rotors. Clean and lubricate caliper slides. Clean wheel hubs for correct rotor to hub contact. Check and fill brake fluid. Road test vehicle.
Replace front brake pads and rotors. Clean and lubricate caliper slides. Clean wheel hubs for correct rotor to hub contact. Check and fill brake fluid. Road test vehicle.
Road test and verify engine performance, transmission operation, and shift patterns. Flush transmission which includes: flushing of transmission cooler, cooler lines, valve body, and torque converter. Flush all contaminated fluid out and replace with f
Roberta B. gave our service a 5 star review on 5/18/2023
Client states there is a thumping noise while driving seems from the drivers rear
Tested sensor heater circuit resistance = open. Connector very corroded. Will need to remove plenum to clean connector and replace air fuel ratio sensor.
Kim S. gave our service a 5 star review on 8/17/2020