2021 Jeep Compass
Mileage
6,117
Service Date
10/11/2021
Services Performed
- Oil change service
- Rotate and Balance Tires
John K. gave our service a 5 star review on 10/12/2021
-
-
2010 Jeep Commander
Mileage182,528Service Date10/5/2021Services Performed- R&R fuel tank and replace fuel pump-check for cracked plastic, causing evap leak. Clear codes.
Bill Y. gave our service a 5 star review on 10/6/2021 -
2010 Jeep Commander
Mileage180,843Service Date6/22/2021Services Performed- Performed testing on the check engine light there is a trouble code P0456 in the computer memory (small evap leak detected) There is a small evap leak detected causing the check engine light. Pinpoint testing will need to replace both the gas cap and the leak detection pump.
- Replace natural vacuum leak detection pump
Bill Y. gave our service a 5 star review on 6/23/2021 -
2010 Jeep Commander
Mileage180,174Service Date1/13/2021Services Performed- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- Replace muffler/tail pipe assembly
- There is several rust holes in the muffler, and the tail pipe is also starting to rust , will need to replace the muffler and tail pipe
Bill Y. gave our service a 5 star review on 1/19/2021 -
2009 Jeep Wrangler
Mileage30,240Service Date7/27/2020Services Performed- Oil and filter change service
Gunter / Rosanna S. gave our service a 5 star review on 7/28/2020 -
2018 Jeep Wrangler
Mileage31,622Service Date7/22/2020Services Performed- Oil change service
Kate F. gave our service a 5 star review on 7/24/2020 -
2011 Jeep Wrangler
Mileage72,749Service Date8/16/2019Services Performed- Inspected the brakes, there is good brake pad material remaining on both the front and the rear and the rotors seem ok also. There is no problems with the brakes however the noise may be related to pad material .
- Labor to perform complete vehicle inspection .
- Road test and verify engine performance, transmission operation, and shift patterns. Flush transmission which includes: flushing of transmission cooler, cooler lines, valve body, and torque converter. Flush all contaminated fluid out and replace with f
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- Mount and balance four tire/wheel assemblies.
- Place vehicle on alignment rack, attach equipment, measure caster, camber and toe. Compare to vehicle specifications. Set and adjust all approved alignment angles with allowable specifications.
- Access cabin filter housing remove old air filter. Clean out housing of debris. Install new filter. Fasten housing.
Susell Z. gave our service a 5 star review on 8/23/2019 -
2016 Jeep Compass
Mileage15,429Service Date11/30/2018Services Performed- Oil and filter change service
Bill Y. gave our service a 5 star review on 12/3/2018 -
2010 Jeep Commander
Mileage174,230Service Date9/26/2018Services Performed- Confirmed the customers concern. Removed parts to gain access and learned the water pump has seized. Will need to replace the water pump, serpentine belt coolant flush, and thermostat
- Replace waterpump
- coolant flush and fill
- .
- Replace thermostat assembly
Bill Y. gave our service a 5 star review on 10/1/2018 -
2010 Jeep Commander
Mileage103,475Service Date11/3/2017Services Performed- .
- Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel .
- Battery replaced
Bill Y. gave our service a 5 star review on 11/7/2017
